Industrial dehumidifiers are widely used in large computer rooms (medicine, electric power, telecommunications); industrial workshop warehouses (electronics, footwear, clothing, tobacco, grain, leather, glass, paper); file management (banks, *, museums, archives) , government agencies); underground works (metro, civil defense, cross-river tunnels); HVAC, fresh air systems, etc.
Industrial dehumidifier common fault phenomenon (1), leakage: refers to the dehumidifier refrigerant leakage; dehumidifier electrical (line, body) insulation leakage caused by leakage.
(2) Plugging: Refers to the dirty plugging and ice blockage of the dehumidifier cold system; the air filter of the dehumidifier is blocked; the air inlet of the dehumidifier and the air outlet of the dehumidifier are blocked by obstacles.
(3), broken: refers to the disconnection of the electrical line; the fuse is blown; the contact of the overload protector is disconnected due to overheating or excessive current; the contact of the pressure relay is disconnected due to abnormal pressure in the refrigeration system.
(4) Burning: The winding of the compressor motor, the winding of the fan motor, the solenoid valve coil, the relay coil and the contacts are burned.
(5) Card: refers to the compressor stuck, the fan stuck, the bearing of the moving parts stuck.
(6) Damage: Refers to the breakage of the compressor valve, the pulling of the piston, the breakage of the fan blades of the dehumidifier, and the damage of various components.
Industrial dehumidifier common fault phenomenon (1), leakage: refers to the dehumidifier refrigerant leakage; dehumidifier electrical (line, body) insulation leakage caused by leakage.
(2) Plugging: Refers to the dirty plugging and ice blockage of the dehumidifier cold system; the air filter of the dehumidifier is blocked; the air inlet of the dehumidifier and the air outlet of the dehumidifier are blocked by obstacles.
(3), broken: refers to the disconnection of the electrical line; the fuse is blown; the contact of the overload protector is disconnected due to overheating or excessive current; the contact of the pressure relay is disconnected due to abnormal pressure in the refrigeration system.
(4) Burning: The winding of the compressor motor, the winding of the fan motor, the solenoid valve coil, the relay coil and the contacts are burned.
(5) Card: refers to the compressor stuck, the fan stuck, the bearing of the moving parts stuck.
(6) Damage: Refers to the breakage of the compressor valve, the pulling of the piston, the breakage of the fan blades of the dehumidifier, and the damage of various components.
Nose Beam Machine For Cup Mask
Nose Beam Machine,Nose Bridge Beading Machine,Kn95 Masks Upper Nose Beam Machine,Kn95 5 Layers Cup Respirator Machine
Ningbo Dokee Mask Machine Co., Ltd. , https://www.autrendsmac.com