The universal pulverizer uses the high-speed relative motion seen by the movable sprocket and the fixed sprocket to make the pulverized material crushed by the combined effects of tooth impact, friction and material impact. How to use the universal grinder correctly? What should I pay attention to when using the universal grinder? Let's learn together.
1. Before use, first check if all the fasteners of the machine are tightened and the belt is tight.
2. The universal crusher should be equipped with a suitable circuit breaker according to the power of the universal crusher. The purpose is to automatically cut off the power when the universal crusher is overloaded and the current is too large to protect the motor. The gap between the rotor and the stator is suitable, the pulverizing effect is better; the universal pulverizer has better sealing performance, and the labyrinth seal is built in to prevent dust from overflowing; the granulated material particles should not be too large, such as the boring machine (ie, the universal pulverizer) If the load is too large, the speed will be slower or may be stopped.) The power should be cut off immediately.
3. Check whether there are any hard objects such as metal in the crushing room of the machine (the material must be checked for purity before crushing, and no metal hard materials are allowed to mix in.) Otherwise, the tool will be damaged and the machine will be affected.
4. The universal crusher has high output, low noise, low energy consumption, simple maintenance and convenient installation. The model with dust removal function adopts quick-disconnect structure for system pipe connection, which can be disassembled and cleaned quickly and conveniently.
5. Because the rotor rotates at a high speed, it brings in a large amount of air, so it has a self-cooling function, and can be applied to crushing heat-sensitive materials with lower requirements;
6. The universal crusher can be equipped with a cyclone separator and a dust remover. There is no dust flying during the production process, and the dust trapping bag can effectively retain the fine powder in the airflow. At the same time, the fine powder trapped by the dust trap bag can be effectively recycled, which reduces the loss rate of the material.
7. Replace the screen. When flushing the pulverizer, care should be taken to avoid water rushing into the motor, fan control box and bearing, so as not to affect the service life. Keep the pulverizer clean and hygienic at all times. For the service life of the extended bearing, it should be added in time. Lubricating grease, ZL-1 lithium grease for lubrication, oil cup above the bearing housing for pressure injection grease.
Immunization Using Cell Culture Based Rabies Vaccines
Rabies is a viral infection transmitted by saliva of infected mammals, most commonly wild, terrestrial carnivores (e.g., skunks, raccoons, foxes, coyotes) or bats.
Immunization Using Cell Culture Based Rabies Vaccines,Based Rabies Vaccines,Cell Culture Rabies Vaccines,Cell Culture Based Rabies Vaccines
Changchun Zhuoyi Biological Co., Ltd , https://www.zhuoyibiological.com