With the development and strength of related technologies, ultrasonic bottle washers have been widely used in the machinery industry, electronics industry, medical industry, semiconductor industry, etc., together with the corresponding cleaning agents can be used to clean all kinds of stains.
The ultrasonic bottle washer is based on the principle of ultrasonic cavitation. When the bubble formed by the ultrasonic wave suddenly ruptures, more than 1000 atmospheric pressures will be generated. This kind of intense micro-blasting and shock wave is used instead of artificial, so that the surface of the object to be cleaned is The dirt was destroyed and quickly fell off.
For the use of ultrasonic bottle washers, do you really understand? Recently, there are ultrasonic bottle washer manufacturers to simply summarize the correct operation of the equipment.
Before using the ultrasonic bottle washer properly, the operator needs to know the reason for the device. In general, ultrasonic waves can be classified into three types, namely, infrasound waves, sound waves, and ultrasonic waves. The frequency of the infrasound wave is below 20 Hz; the frequency of the acoustic wave is 20 Hz to 20 kHz; and the frequency of the ultrasonic wave is above 20 kHz.
Among them, the infrasound wave and the ultrasonic wave are generally inaudible to the human ear. Ultrasonic waves have high directionality and strong penetrability due to their high frequency and short wavelength, which is why the ultrasonic cleaner is designed and manufactured.
The ultrasonic bottle washer is mainly composed of an ultrasonic cleaning tank and an ultrasonic generator. “The ultrasonic cleaning tank is strong and flexible, and has the advantage of corrosion resistance. The ultrasonic transducer vibrator is installed at the bottom.†The manufacturer said that the ultrasonic wave can be transmitted to the transducer through the cable coupling line, and the transducer is generated together with the vibration plate. High frequency resonance, so that the solvent in the cleaning tank is washed by ultrasonic waves.
When using this equipment, operators need to perform step-by-step operations in strict accordance with the following requirements. First, connect the cable between the cleaning tank and the generator. Secondly, pour the cleaning liquid into the cleaning tank. It should be reminded that the amount of the cleaning liquid is the position of the liquid surface when the object to be cleaned is placed. Three-quarters of the whole. Then it will be cleaned and placed in the cleaning tank, then plug in the power plug; finally, set the cleaning time, and then turn it on.
There are a few issues to be aware of when using the device. First, the ultrasonic bottle washer power supply and the electric heater power supply must have a good grounding device; secondly, the ultrasonic bottle washer is strictly prohibited to start without the cleaning liquid, that is to say, the cleaning cylinder does not add a certain amount of cleaning liquid, and the ultrasonic wave cannot be closed. switch.
Third, the cleaning equipment with heating equipment is strictly prohibited to open the heating switch when there is no liquid; fourth, it is impossible to hit the bottom of the cleaning cylinder with heavy objects to avoid damage to the energy converter wafer.
For the reason that the ultrasonic bottle washer is not ideal for cleaning, the manufacturer believes that there are mainly four aspects. The cleaning liquid in the cleaning tank of the ultrasonic bottle washer is not good, which may result in unsatisfactory cleaning. It is necessary to adjust the cleaning machine liquid level to improve the cleaning effect.
If the ultrasonic frequency coordination is not adjusted, the ultrasonic cleaning machine will not be cleaned and needs to be re-adjusted. In addition, if the temperature of the liquid in the cleaning tank is too high, the cleaning may not be ideal, so the temperature of the cleaning solution should be controlled. The improper selection of the cleaning solution is also one of the reasons why the ultrasonic cleaning machine is not ideally cleaned, and it is necessary to select a suitable cleaning liquid.
In fact, the high-speed vibration of the ultrasonic wave can clean and sterilize the surface of the cleaning article, the cavitation effect is obvious, the cleaning efficiency is also significantly higher than the manual cleaning, and there is no clean corner and damage. But these effects are based on the correct operating process and a reasonably efficient production environment. Therefore, in order to achieve a better cleaning effect, the operator needs to pay attention to some operational matters.
Hysteroscopy Resectoscope Instruments
Hysteroscopy Resectoscope Instruments,Gynecology Operation Instrument,Gyaecology Resectoscope Set,Gyaecology Hysteroscopy Instrument
ZHEJIANG SHENDASIAO MEDICAL INSTRUMENT CO.,LTD. , https://www.sdsmedtools.com