FU type chain conveyor features description
1. The conveying capacity is large, allowing a large amount of materials to be transported in a small capacity space, and the conveying capacity is 15 to 500 m3/h.
2, the transmission energy consumption is low, with the internal friction of the material, compared with the screw conveyor, saving 40% to 60%.
3, sealed and safe, fully sealed chassis makes the dust seamlessly drillable, safe operation and reliable operation.
4, long service life, the use of alloy steel through advanced heat treatment processing of the conveyor chain, its normal life> 3 years, the sub-life of the chain 1 to 3 years.
5. The conveying length is long, and the horizontal conveying distance can reach more than 60 meters.
6, the process layout is flexible, can be elevated, ground, pit, climbing installation, can be more points into and out of the material.
7, low cost of use, energy saving and durable, low maintenance rate, reduce consumption and improve efficiency.
FU type chain conveyor horizontal conveying equipment, FU type chain conveyor working principle: due to the material has internal friction and side pressure characteristics, the movement of the conveyor chain makes the internal pressure of the material in the tank and the internal friction between the particles When the force increases, when the internal friction between the layers is greater than the external friction between the material and the groove wall, the material flows forward like the water along with the conveyor chain, and the ratio of the height of the layer to the width of the groove satisfies When conditions are met, a stable stream of material can be formed. The advanced chain conveyor conveying principle, sophisticated design and manufacturing process provide a reliable guarantee for the excellent performance of this series of products. FU type chain conveyor equipment selection: (1) Select the chain speed according to the state of the material, and select the slow speed for cement and raw materials for materials with strong grinding, high temperature, large proportion of coarse particles and large material. For chain speed selection, other materials with similar properties and state of cement can be selected. (2) Select the model according to the delivery amount. Under the same conveying amount, selecting a larger model can reduce the chain speed and prolong the service life. However, when the conveying amount is less than 30% of the conveying amount, the material layer will be too thin to form idling and increase wear. (3) Select the power according to the conveying amount, the conveying length and the process condition. The assembly form of the chain conveyor drive device is divided into X1, X2, left and right, etc., and X2 is a back-mounted type. (4) Each inlet and outlet, the user selects according to the needs. a. In order to avoid the smooth feeding, it is not suitable to use the upper feed port for materials with poor fluidity and high humidity. b. When the first feed port is close to the tail axis, the upper feed port should not be used. c. According to the needs of users, this machine can be equipped with multiple inlet and outlet ports, and can also provide gate discharge port.
The working principle of the chain conveyor:
A chain conveyor (belt conveyor) is a friction driven machine that transports material in a continuous manner. It can be used to form a material conveying process on a certain conveying line from the initial feeding point to the final discharging point. It can carry out the transportation of broken materials as well as the transportation of individual items. In addition to pure material handling, it can also be combined with the requirements of the process in the production process of various industrial enterprises to form a rhythmic flow line. Therefore, belt conveyors are widely used in modern industrial enterprises.
Because the product is a non-standard product, it is affected by factors such as the model, material, specification, length or height of the equipment, so the price of the goods identified above is for reference!
The actual actual price needs to be determined after the customer communicates with the relevant personnel of our company. The specific product price is determined by the material (carbon steel or stainless steel) and specifications (according to the customer's processing capacity, material size, etc.), the actual length of the customer's site or height, etc., so we need to communicate with us after we communicate with you. Accurate and detailed quotation.
Dried Kelp Slice
Dried Kelp Series is made of Haizhibao deep sea young kelp by drying directly without any addition,so that it can maxmium retains the 23 kinds of nutritions .It turns green when match the water at once with high swelling and especially suitable for making soup.salad or used as fillings,Due to the convenience and easy-storag,it`s a new choice to live healthy and nutritions.
How to eat
- Take out the kelp
- Soak until swelling compelety
- Cook,make soup.salad and other dishes
The difference between deep sea kelp and traditional ordinary kelp
Dried Kelp Slice,Dried Nori Seaweed,Dried Kelp Flakes,Dried Seaweed Flakes
Shandong Haizhibao Ocean Science and Technology Co.,Ltd. , https://www.haizhibaoseafood.com