Tunnel furnace energy saving type of application

Many people are not very familiar with some of the conditions of energy-saving power-saving tunnel furnaces .

Let's take a look at some of its situation in detail: the energy-saving tunnel furnace.

Applicable scope of energy-saving power-saving tunnel furnace: suitable for rapid drying of solvent-based inks and drying of water-containing objects; widely used in printing, electronics, plastics, silicone, food, chemical and other industries.

Main performance and configuration of energy-saving and energy-saving tunnel furnace:

1. Energy-saving power-saving tunnel furnace drying tunnel working space temperature Zui high can not be lower than: normal temperature -50 °C.

2. Box-shaped split design, the length of the whole drying tunnel is 3m, and the drying section is divided into 1 section (2m is 1 section), and each section is divided into 9 heating tubes, each of which has a distance of 175mm. The drying tunnel is 500m wide, the feeding inlet of the drying tunnel is 0.5m, the width of the mesh belt is 500m, and the discharge opening is 0.5m.

3. The heating pipes are installed on the upper part and are installed in parallel.

4. The material of the transmission belt is imported Teflon mesh belt.

5. According to the different drying items, in order to make the mesh belt can bear the large weight of zui, a rolling roller is placed every 300mm.

6. All the heating pipes are ceramic far-infrared lamps produced in Taiwan, and the temperature control precision is high.

7. The power supply for the energy-saving power-saving tunnel furnace drying tunnel is three-phase 380V/50HZ, and the lamp voltage is 380V/50HZ.

8. The net height of the energy-saving power-saving tunnel furnace heating zone is 200mm. Each section of the heating control is controlled by an independent temperature control detector. ±3°C.