After a winter, as the temperature rises, Coprinus comatus will produce mushrooms again and enter the spring management stage. Prior to fruiting, check the disease, insect damage, moisture and other conditions of the fungus, and make corresponding treatments.
The first is to strictly check the miscellaneous bacteria. Coprinus comatus is more prone to gypsum mold and Coprinus comatus. Once discovered, it must be cleaned up immediately to prevent its spread and expansion. In addition, check the walls of the greenhouse and the wooden pillars, etc., and when found to have bacteria growing, scrape off and spray the poly-A solution in time.
The second is to deal with pests in time. Carefully observe whether there are springworms, horse land, mushroom mosquitoes (flies), mites and other pests in the shed. In particular, it is necessary to open the fungus to strictly inspect the inside and bottom of the base. Because in the low temperature season, pests are generally hidden in the material and the place where the temperature at the bottom of the border is high. When pests are found, they should be fumigated and killed with mushrooms and insects. At the same time, pyrethroids can also be sprayed on the exposed places in the shed to kill them more thoroughly.
The third is to pay attention to water replenishment. After the fruiting of last year and the low temperature drying in winter, the base material loses water seriously, and the covering soil also loses water. The main method of replenishing water is: use a shovel tool to insert from the border surface to the border bottom with an interval of about 20 cm, and then irrigate it for 1 to 2 times. After about 1 week, the base material will absorb water to the moisture content of the original seeding. Note that this irrigation is intended to supplement the moisture of the base material. Most of the moisture needed for the first batch of mushrooms will be obtained from this, and the next time the mushrooms will not be flooded, it must be supplemented. Then you can fill in the soil and level the border surface. When the moisture in the newly-filled soil is insufficient, you can spray with water in an appropriate amount.
After the above work is confirmed to be correct, you can increase the ventilation in the shed and increase the air humidity to more than 70% accordingly. The grass thatch can be properly lifted before the mushrooms appear to increase the light intensity and give certain stimulation. When the temperature stabilizes at 16 After ℃, a large number of mushroom buds can grow. After that, it entered the normal fruiting management stage.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone
We are Hospital Electric From China Manufacturer Medical Bed, also known as Hospital Bed Home Care, Hospital Equipment, Nursing Bed, etc., is a hospital bed used by patients when they are hospitalized in the hospital.
There are many classifications of medical beds, and the specific classification methods are as follows: According to the material, it can be divided into ABS medical beds, all stainless steel medical beds, semi-stainless steel medical beds, all steel sprayed medical beds, etc.
According to the function, it can be divided into electric medical beds and manual medical beds. Among them, electric medical beds can be divided into five-function electric medical beds and three-function electric medical beds. Manual medical beds can be divided into double-shake medical beds and single-shake medical beds. Medical beds, flat medical beds.
According to whether it can be moved, it can be divided into a wheeled medical bed and a right-angle medical bed. Among them, electric medical beds are generally movable with wheels.
Hospital Bed Mattress,Anti Bedsore Air Mattress,Inflatable Air Mattress,Homecare Bed Mattress
Haloxylon Ammodendron Medical Equipment Co., Ltd. , https://www1.haloxylonhospital.com