Introduction to the basic use of instrument multi-element analysis instruments

The basic method of using the multi-element analysis instrument to an instrument, the instrument is coupled with the power mains socket connected to the mains power supply line and the grounded equipment, (otherwise susceptible to interference, caused by fluctuations in the data); Check drain hose Whether the installation is firm (do not put the outlet end of the liquid discharge hose into the waste liquid to avoid poor liquid discharge), and inject distilled water (reference liquid) into the cuvette, turn on the power switch of the instrument, and the furnace number is displayed at this time. If you need to modify it, press the one-digit key and end with the “Execute” button. At this time, the channel displays the density value. After the power is stabilized for 10~15 minutes, the zero input and full scale adjustment can be performed.

Second, the zero input and full scale adjustment instrument in daily use, need to adjust the zero point and fullness of the work, the general zero point does not need to be adjusted frequently, each time you turn on the power can be adjusted once.

Press the channel key, the sign bit of the channel digital tube displays “U”, the remaining 4 digits display the signal percentage (transmission rate U), press the zero-ammonium button (sometimes there is sound), the zero point is input and stored Get up, then press the zero knob to return to normal. Adjust the channel full-scale adjustment knob so that the signal percentage is displayed as about 100.0. Press the full-scale button again, the full-scale is tracked to 100.0. The zero input and full-scale adjustment work of the channel is completed, press the “Exit” button.

Heat Meters

Heat meters are one kind of meters measuring the heat consumption. In order to save the energy and decrease the environment pollution, the heat meters are more and more popular for the modern buildings. Heat meters can realize centralized heating supply. Now with the rapid technology development, the heat meters also experience a fast way of growing up. Now the government of the world starts to pay much attention to the building remolding and new buildings heat meter installation. As the new type of energy calculation, the heat meters have the advantages of higher accuracy, energy saving and easy installation.

From the functions of the different types of heat meters, there are mechanical heat meters, digital heat meter,Ultrasonic Heat Meters, M-bus Heat Meters and also wireless heat meters. Our company, Berggruen Technology Co.,Ltd never stops the steps for further higher technology research and development. We are devoted to study the new technology in the world to make better quality heat meters.

Heat Meters,Mechanical Heat Meters,Ultrasonic Heat Meters,M-Bus Heat Meter,Digital Heat Meter

Berggruen Technology Co.,Ltd , https://www.meter-technology.com