Installation instructions 1. Refrigerant placement (1) The machine should be placed in a place where air is circulated and clean around.
(2) This machine should not be placed in the open air, and should not be exposed to direct sunlight or rain. You can't get close to the heat source around.
(3) The environment in which the machine is used must not be lower than 5 ° C and not higher than 38 ° C.
(4) There should be enough space around the machine, especially the back can not be less than 250mm. So that the machine is cooling.
(5) Please adjust the anchor screw on the bottom of the machine to ensure the level of the machine is stable.
2. Installation of water system (1) Please connect the water source that meets the local drinking water standard.
(2) Attach a filter if necessary to increase the drinking standard of water.
(3) The water supply system must meet the following conditions:
a, water temperature zui low 2 ° C, zui high does not exceed 38 ° C
b, water pressure zui low 0.02Mpa, zui high 0.8Mpa
3. Installation of the power supply (1) The power supply must be the same as indicated on the machine nameplate.
(2) All lines must comply with national standards.
(3) Must be reliably grounded, the grounding wire must meet electrical standards.
(4) The voltage fluctuation shall not exceed ±10% of the rated voltage.
(2) This machine should not be placed in the open air, and should not be exposed to direct sunlight or rain. You can't get close to the heat source around.
(3) The environment in which the machine is used must not be lower than 5 ° C and not higher than 38 ° C.
(4) There should be enough space around the machine, especially the back can not be less than 250mm. So that the machine is cooling.
(5) Please adjust the anchor screw on the bottom of the machine to ensure the level of the machine is stable.
2. Installation of water system (1) Please connect the water source that meets the local drinking water standard.
(2) Attach a filter if necessary to increase the drinking standard of water.
(3) The water supply system must meet the following conditions:
a, water temperature zui low 2 ° C, zui high does not exceed 38 ° C
b, water pressure zui low 0.02Mpa, zui high 0.8Mpa
3. Installation of the power supply (1) The power supply must be the same as indicated on the machine nameplate.
(2) All lines must comply with national standards.
(3) Must be reliably grounded, the grounding wire must meet electrical standards.
(4) The voltage fluctuation shall not exceed ±10% of the rated voltage.
Shiatsu Massager,Shiatsu Neck Massager,Shiatsu Back Massager,Electric Muscle Massager
Ningbo Prestigeplus Commodity Co.,Ltd , https://www.prestigemedics.com