Pretreatment of citrus peel. Dried citrus peels are rehydrated first to remove sugars, acids, pigments and some bitter substances that affect the quality and flavor of pectin. Soak in warm water at 50°C and rinse for 2-3 hours to prevent the hydrolysis of pectin by pectinase. Put the soaked citrus peel in boiling water for 3 to 5 minutes to prevent loss of pectin.
Exchange resin requirements. Use sulfonated polyethylene resin. The resin must not be degraded at 100°C, not hydrolyzed under moderate acidity conditions, and the resin can be used for a long time.
Extraction conditions. The pH value is 1.2～1.3, the temperature is 80℃, and the time is 1 hour.
******precipitation. The concentrated pectin is cooled to room temperature, and solid pectin is obtained by precipitation. ****** The coagulation of pectin must have electrolyte to promote its complete precipitation.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone
Exchange resin requirements. Use sulfonated polyethylene resin. The resin must not be degraded at 100°C, not hydrolyzed under moderate acidity conditions, and the resin can be used for a long time.
Extraction conditions. The pH value is 1.2～1.3, the temperature is 80℃, and the time is 1 hour.
******precipitation. The concentrated pectin is cooled to room temperature, and solid pectin is obtained by precipitation. ****** The coagulation of pectin must have electrolyte to promote its complete precipitation.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone
Dsm Camera,Waterproof Dsm Camera,Dms Anti-Fatigue Driving Camera,Anti-Fatigue Driving Camera
Vsstech Co.,Ltd. , https://www.vsstechcctv.com