Brief analysis of the use of cutting machine

The cutting machine is equipped with single-phase motor, adopts high-grade bearing, and installs four blades on the cutter head. The speed ratio is slow and the slicing effect is high. The slice thickness can be adjusted. It is widely used in Chinese pharmacies, pharmacies, Chinese medicine processing plants, etc. The utility model has the advantages of small volume, high efficiency, simple operation, exquisite and beautiful, that is, power saving and safety.

Do you know how to use the cutting machine?

1. Adjustment: firstly loosen the copper nut when adjusting, then adjust the thickness direction of the nut and the copper column. After the thickness is adjusted, the nut and the copper column must be tightened. Do not switch the cutter if it is parallel to the blade. The cutter must be lower than the blade to start cutting. The adjustment Zui is about 3mm thick, and the thin is steplessly modulated.

2. Replace the blade: Insert the hexagonal handle into the side hole of the machine. Rotate to adjust the disc direction and then change the knife. When changing the knife, loosen the two hexagonal screws of the blade and insert the blade to replace it.

Stryker Type External Fixators

Knee Hip Replacement,Artificial Knee Arthroplasty,Hip Knee Implant ,Total Knee Prosthesis

Jiangsu Health Medical Technology Development Co., Ltd. , https://www.medicalhos.com

Posted on